Valve Spring Compressor C Clamp Tool Set

Bruide B-3012 is a valve spring compressor C-clamp tool kit that places a part with the appropriate diameter as the upper spring, which should be the same as the valve. Depending on the diameter and overall length of the spring, the compressor spring can be installed at the end of the valve. Adjust the compressor bow on the valve side so that there is enough room for compression or tensioning. Tighten the compressor with a lever until there is enough space for easy and safe disassembly.

Valve Spring Compressor C Clamp Tool Set Applications

The B-3012 is available in 5 different sizes of pushrods to fit a variety of spring diameters on most cylinder heads, such as cars, minivans, ATVs, UTVs, motorcycles, and other small engine vehicles.

Valve Spring Compressor C Clamp Tool Set Features

  • The handle is made of pure steel, which is not easily bent and deformed when compressed, providing maximum strength and longevity. 

  • The ends of the C-clamp are arranged in a standard straight line, making it less likely to slip when used. 

  • Its smooth surface is coated with black oxide to provide superior strength and corrosion resistance, and can withstand the pressure of compression springs.

Specification of Valve Spring Compressor C Clamp Tool Set

  • 5x Metric collets --- 16mm, 19mm, 23mm, 25mm, 30mm

  • 1x spring compressor U-clamp with a maximum jaw opening of 9.5 inches

  • 3x extension screws

  • 1x compression bar

  • 1x storage case

  • 1x Use Manual

Contact Us!
Contact Us!
Tell us your need for auto tools, we will respond you within 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept