E36 E46 Oil Filter Wrench Socket Adapter for BMW

The E36 E46 Oil Filter Wrench Socket Adapter for BMW is a tool used for removing the oil filter housing on certain BMW models. This particular adapter is designed to fit the oil filter housing on BMW E36 and E46 models, which include the 3 Series sedans, coupes, and convertibles produced between 1992 and 2006.

The adapter fits onto a standard 3/8" drive ratchet or extension, and allows you to easily remove the oil filter housing without damaging it. It is made from high-quality materials that are designed to withstand the rigors of automotive use, and it is precision-engineered to provide a tight and secure fit on the oil filter housing.


If you're planning on performing your own oil changes on a BMW E36 or E46 model, or if you're a professional mechanic or technician who works on these vehicles, the E36 E46 Oil Filter Wrench Socket Adapter is a useful tool to have in your toolbox.


Next we will tell you the correct steps to use it.


1.Locate the oil filter housing: It’s on BMW E36 and E46 models is typically located on the top of the engine, near the front of the vehicle.



2.Choose the right adapter size: Make sure you have the right size adapter for your particular model of BMW.



3.Attach the adapter: Attach the adapter to a 3/8" drive ratchet or extension. Make sure the adapter is securely attached to the ratchet or extension.



4.Insert the adapter: Insert the adapter into the oil filter housing on your BMW. Make sure the adapter fits snugly into the housing.



5.Turn the adapter: Use the ratchet or extension to turn the adapter counterclockwise. This will loosen the oil filter housing.



6.Remove the oil filter housing: Once the housing is loose, you can remove it by hand. Be careful, as oil may leak out of the housing.



7.Replace the oil filter: Remove the old oil filter from the housing and replace it with a new one. 8. 8. Make sure the new filter is properly seated in the housing.



9.Reinstall the oil filter housing: Once the new filter is in place, reinstall the oil filter housing onto your BMW. Use the adapter and ratchet or extension to tighten the housing clockwise.



10.Clean up: Wipe up any spilled oil or debris, and dispose of the old filter and any used oil properly.


After changing the adapters, there will be a problem of disposing of the old filter and used oil properly?


At first for the old oil filter:

It should be properly drained before disposal. You can do this by holding the filter upside down for a few minutes to let the oil drain out or use an oil filter drain tool or a drip pan to catch any remaining oil.

At second for used oil:

Used oil should never be thrown away in the regular trash or poured down the drain. It is considered hazardous waste and must be disposed of properly. You can take the used oil to a recycling center or an auto parts store that accepts used oil for recycling. Many municipal waste departments also offer used oil recycling services.


If you have any other questions for the E36 E46 Oil Filter Wrench Socket Adapter for BMW, just feel free to leave us messages.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept