How to Remove Ford Steering Wheel Puller?

If you are a car enthusiast or someone who loves DIY car maintenance, you may encounter the need to remove a Ford steering wheel puller at some point. Whether it is to replace a faulty part or to add a custom steering wheel, removing the steering wheel can be a challenging task. However, with the right tools and knowledge, you can easily remove the Ford steering wheel using a puller. In this blog post, we will guide you through the process of removing a Ford steering wheel using a steering wheel puller.

The Importance of Using a Steering Wheel Puller

When it comes to removing a Ford steering wheel, using a steering wheel puller is vital. A puller ensures a safe and efficient removal process without causing any damage to the steering column or other components. It provides the necessary force to pull the wheel off its spline smoothly. Attempting to remove the wheel without a puller might lead to costly repairs or even injuries.

Step-by-Step Guide for Removing a Ford Steering Wheel Puller

To remove a Ford steering wheel, follow these steps carefully:

1. Disconnect the Battery: Begin by disconnecting the negative terminal of the car's battery to avoid electrical mishaps during the process.

2. Remove the Horn Cover: Locate the horn cover at the center of the steering wheel and carefully remove it. It is usually held in place by a few screws or clips.

3. Disconnect Electrical Connections: After removing the horn cover, you will see electrical connections for buttons or controls on the steering wheel. Disconnect these connections by carefully detaching the connectors.

4. Remove the Retaining Nut: Using a wrench, remove the retaining nut that secures the steering wheel to the column shaft. Place the nut aside in a safe place as you will need it later.

5. Attach the Steering Wheel Puller: Affix the steering wheel puller onto the steering wheel's center hub or spokes. Ensure that it is securely fastened and aligned properly.

6. Apply Pressure and Remove the Wheel: Begin tightening the puller's threaded bolts, gradually applying pressure to pull the steering wheel off the spline. Keep tightening until the wheel pops off the spline completely.

7. Inspect and Disconnect Airbag System (if applicable): If your Ford vehicle is equipped with an airbag system, carefully inspect the wiring connections and disconnect them before removing the steering wheel completely.

8. Complete the Removal: Once the steering wheel is off the spline, gently lift it off and set it aside in a safe place.

Tips and Precautions for Using a Puller Safely

- Always wear safety goggles and gloves to protect yourself during the removal process.

- Make sure the puller is centered and tightened securely onto the steering wheel, ensuring an even and balanced force distribution.

- Avoid excessive force when tightening the puller to prevent damage to the steering wheel or column.

- Read and follow the instructions provided with the specific puller you are using to ensure proper usage.


Removing a Ford steering wheel requires careful attention and the right tools, namely a steering wheel puller. By following the step-by-step guide mentioned above and taking necessary precautions, you can successfully remove the steering wheel without any hassle. Remember, if you are unsure about any step or encounter difficulties, it is always recommended to seek professional help to avoid any damage or complications. So, gear up and get ready to remove that steering wheel like a pro!

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept